IMPACTPRO® Hygienic Wall Cladding - Specification - Supply - Installation
Why Specify IMPACTPRO® Hygienic Wall Cladding?
A coordinated PVC-u wall-cladding range for commercial and healthcare interiors, backed by technical support, project take-off and professional installation.
IMPACTPRO is designed as a wall-system route rather than a sheet-only purchase. Select the finish, sheet format, jointing method, corners, accessories and installation around the actual room and project specification.
Discuss an IMPACTPRO specification | Explore IMPACTPRO systems
Specify the finished wall system, not just the sheet
The value of hygienic wall cladding is created by the complete build-up: substrate, bonding, sheet set-out, joints, corners, openings, service penetrations and installation. IMPACTPRO lets those decisions be coordinated as one project package.
Four core design routes
IMPACTPRO White, Satin, Gloss and CALYX provide routes from clean neutral walls to coloured and architectural tile-effect finishes.
Jointing chosen up front
Profiled and welded routes can be considered before procurement so substrate preparation, accessories and the visual finish are coordinated properly.
Thermoformed detailing
Selected systems can use formed internal and external corner details where appropriate to the finish, substrate and project specification.
Drawing-led planning
Plans and elevations can be reviewed around sheet widths, openings, services and room heights before material quantities are finalised.
Supply, install or both
Impact Group UK supports supply-only, install-only and coordinated supply-and-install packages.
Product warranty support
IMPACTPRO White, Satin and Gloss are covered by Impact Group UK's Lifetime Product Warranty, subject to current published warranty terms.
The sheet is one component of the finished wall
A good wall-cladding specification defines the interfaces as well as the surface. IMPACTPRO can be coordinated around the build-up rather than leaving critical details to be resolved after materials arrive.
- Substrate: confirm flatness, stability, preparation and suitability before the bonding system is finalised.
- Sheet set-out: plan 1220mm-wide sheets around room heights, openings and interfaces.
- Joint route: select profiled or welded detailing where available.
- Corners and returns: coordinate formed or profiled details around the selected finish and geometry.
- Openings and services: check doors, windows, controls and penetrations against the sheet set-out before cutting.
- Installation and handover: define materials, programme, access, fitting and project responsibilities as one clear scope.
Choose the IMPACTPRO finish around the space
Use the room, cleaning regime, design intent and specification to choose the right IMPACTPRO wall-cladding route.
IMPACTPRO White
2.5mm solid PVC-u white hygienic wall cladding for healthcare, kitchens, food production, education and demanding commercial interiors.
IMPACTPRO Satin
2.5mm solid PVC-u coloured wall cladding for projects requiring a softer architectural colour finish with coordinated jointing and detailing routes.
IMPACTPRO Gloss
2.5mm coloured high-gloss PVC-u wall cladding for design-led commercial, washroom, leisure, hospitality and hygiene-led interiors.
IMPACTPRO CALYX
Architectural grout-free tile-effect PVC-u wall cladding using large-format sheet-system logic for decorative commercial interiors.
Sheet sizes should work with the room, not fight it
IMPACTPRO project routes use 1220mm-wide sheets. Current project formats can include 2440mm, 2800mm and 3050mm heights depending on the selected finish and availability.
Doors and windows should be checked against vertical joints. Where suitable, a joint can align with an opening jamb rather than cutting through the opening. Sockets, controls and service penetrations should be kept clear of vertical sheet joints where practicable.
Final sheet format, jointing route and availability should be confirmed at quotation and specification stage.
Warranty support belongs in the specification conversation
IMPACTPRO White, Satin and Gloss are covered by Impact Group UK's Lifetime Product Warranty. Warranty eligibility, scope, exclusions and conditions remain subject to the current published terms.
Choose the procurement route that fits the project
Impact Group UK can support the wall-cladding scope that actually sits with the project package.
- Supply only: sheets, relevant trims, adhesive and accessories supplied against the agreed specification and quantities.
- Install only: specialist installation where materials are procured through another route.
- Supply and install: one coordinated route from take-off and material planning through to installation.
- Drawing review: plans and elevations reviewed around areas, openings, room heights and project assumptions.
- Site survey: site conditions reviewed where required before installation responsibilities are finalised.
- Technical support: technical data, NBS routes and detailing guidance for design and project teams.
A clear wall-system brief reduces ambiguity at quotation and installation stage
A professional hygienic wall-cladding specification should make the product route, sheet format, jointing, corner detail, openings and services, substrate requirements and procurement responsibility visible.
Use the route the specification actually requires
IMPACTPRO is Impact Group UK's own hygienic wall-cladding range. It is not presented as the same product as Altro Whiterock or another manufacturer system.
If a named manufacturer system is required, Impact Group can support that route too. Any alternative should be presented transparently with appropriate technical information and project-team approval.
Give the specifier, estimator and installer the same information
IMPACTPRO Specification Data | Technical Resources | IMPACTPRO CladIQ | Lifetime Product Warranty
Questions project teams ask before choosing the wall system
Why specify IMPACTPRO hygienic wall cladding?
IMPACTPRO gives project teams a coordinated hygienic wall-cladding route covering product selection, technical information, sheet set-out, joints, corners, accessories, supply and professional installation. The correct product and detail should always be confirmed against the project specification.
What IMPACTPRO finishes are available?
The core range includes IMPACTPRO White, IMPACTPRO Satin, IMPACTPRO Gloss and IMPACTPRO CALYX tile-effect wall cladding. Each route has its own finish, detailing and availability, so the final product should be selected around the room and design requirement.
What size are IMPACTPRO wall-cladding sheets?
IMPACTPRO project formats use 1220mm-wide sheets. Current project routes can include 2440mm, 2800mm and 3050mm heights depending on the selected finish and availability. Confirm the exact format at quotation stage.
Can IMPACTPRO use welded joints and thermoformed corners?
Selected IMPACTPRO systems can use profiled or colour-matched welded joint routes, with thermoformed internal and external corner detailing where appropriate. The chosen route depends on the finish, substrate and project specification.
Does IMPACTPRO have a Lifetime Product Warranty?
IMPACTPRO White, Satin and Gloss are covered by Impact Group UK's Lifetime Product Warranty, subject to the current published warranty terms, eligibility, scope, exclusions and conditions.
Can Impact Group UK supply and install IMPACTPRO?
Yes. Impact Group UK supports supply-only, install-only and coordinated supply-and-install packages, together with project take-off, site survey and technical support.
Is IMPACTPRO the same as Altro Whiterock?
No. IMPACTPRO is Impact Group UK's own hygienic wall-cladding range. Altro Whiterock is a separate manufacturer system. Where Altro is named or preferred, Impact Group can also support Altro supply and specialist installation.
Can IMPACTPRO be specified from drawings?
Yes. Send plans, elevations, room data, wall-finish schedules and relevant project requirements. Impact Group can review the wall-cladding scope, sheet set-out, openings, interfaces and installation requirements before quotation.